POLYchem hat auch im Jahr 2020 erfolgreich am Bewerb Austria's Leading Companies teilgenommen!

Sika Develops Multi-Purpose 130°C Epoxy Resin Family, Biresin® CR132 Suitable for Light Aviation

With Biresin CR132, Sika has developed a family of modular epoxy matrix systems suitable for the light aviation market.

These systems can reach Tg values of over 130°C when properly postcured. As such they are suitable, for example, for the production of dark painted aircraft, so that despite the higher aircraft skin temperatures that can be caused by the effects of solar heating on the darker paint, the necessary thermal stability is guaranteed. Biresin CR132 resin is a hand laminating base system with 3 hardeners (Biresin CH132-2, -5, -7), which all offer similar properties but have different pot lives, from 60 to 210 minutes, allowing for efficient production of different size parts.

Based on the properties of the base CR132 epoxy resin and using the building block principle, 2 further resins have been developed. Biresin CR132 FR which, with the existing hardener Biresin CH132-2, is a special flame retardant (=FR) matrix. This can be used, for example, in the production of cowlings and fireproof bulkheads by hand lamination. This system, CR132FR/CH132-2, achieved a V-0 rating when tested according to the UL94 vertical flammability test. The final resin system uses a different resin, Biresin CR131, to allow for processing by vacuum infusion. This resin with the hardeners CH132-5 and -7 plus another hardener CH135-4 can then be used to produce composites by the infusion process to achieve even higher material performance than those made by hand laminating.

With a total of 3 resins and just 4 hardeners Sika can offer you a complete product family in the form of a modular system, which can give high performance results in a wide variety of applications.

Of course these resin systems can also be used wherever their excellent properties are required, not only in light aviation.

Under the motto “Sika – the complete solution - from the model via the mould to the component”, Sika Tooling and Composites supplies a wide pallet of products including SikaBlock® board materials and Biresin resins, which support the whole process chain in the aviation industry.

Link to Sika Deutschland GmbH